Principal Function

Warm water from the heat source is circulated to the water distribution system. The water is dispersed uniformly over the wet deck fill by means of orifice of the extended arm pipes of the rotary sprinkler. Simultaneously, air is drawn in through the air inlet louvers at the base of the tower and travels upward through the wet deck fill opposite to the direction of the water flow. A small portion of the water is evaporated which removes the heat from the remaining water. The warm moist air is drawn to the top of the cooling tower by the fan and discharged to the atmosphere. The cool water drains to the basin at the bottom of the tower and is returned to the heat source.

Technical Function

The tower design incorporates water inlets at the bottom collection sump through which water is circulated vertically to the mechanical rotary sprinkler located above the fill media. The inlet water forces the rotary sprinkler, having extended arm pipes with orifices to rotate about and disperse water uniformly over the fill media.

The fan directly coupled to the motor is located on the top and during operations take away the heat by induced draft mechanism. Air is drawn from the lower air in take area & is forced to travel through the fill media vertically. During this process it takes away the heat from the water passing through the fill media. A small portion of the water is evaporated which removes the heat from the remaining water. The warm moist air is drawn through the fan deck, by the fan and discharged to the atmosphere. Cold water is collected at the collection sump having the outlet connection through which cold water is re-circulated to the application.

The distinguishing features of our product are compact design Honey comb type PVC fills, with varying flute sizes, to provide maximum contact surface area and heat transfer surface per unit volume.

Salient Features:

All structural in HDG Steel to arrest rust

PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.

TEFC, IP-55 Protected 'F' Class Insulated motor with extended shaft to assist outdoor applications.

Adjustable pitch axial flow, dynamically balanced aluminium fans to improve the air exhaust at minimum power usage.

Casings of FRP (Fibre Reinforced Plastics) for durability and strength

All joints fastened with SS fasteners to arrest rust

Uniformity in water dispersion through rotary sprinkler

Capacities 10TR to 600TR , in single cell

Water flow 5 CMH to 500 CMH, in a single cell

360 Degrees air intake area assist 100% cooling efficiency

Delta T (Temperature drop) 4Deg C to 30Deg C, in single cell

ABS Fills for high temperature applications (150Deg C)

Advantages

All structural in HDG Steel to arrest rust

PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.

TEFC, IP-55 Protected 'F' Class Insulated motor with extended shaft to assist outdoor applications.

Adjustable pitch axial flow, dynamically balanced aluminium fans to improve the air exhaust at minimum power usage.

Casings of FRP (Fibre Reinforced Plastics) for durability and strength

All joints fastened with SS fasteners to arrest rust

Uniformity in water dispersion through rotary sprinkler

Capacities 10TR to 600TR , in single cell

Water flow 5 CMH to 500 CMH, in a single cell

360 Degrees air intake area assist 100% cooling efficiency

Delta T (Temperature drop) 4Deg C to 30Deg C, in single cell

ABS Fills for high temperature applications (150Deg C)

Applications

Aluminium die casting m/c

Air compressors

A/C plant & cold rooms

Blow moulding M/c

Chemical industries

Dairy,Citrus and other food processing industries

Distilleries and Breweries plants

Diesel / Gas Gensets & Megawatt Projects

Glass Mfg. Plant

Herbal,Aromatics & extraction plants

Industries heat process

Oil refineries

Plastic injustion moulding m/c

PVC pipes mfg.plant

Soap / Cosmetic mfg. industries

Steel factory and foundry